Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH
RM27L0U _59 Vehicle Exterior _049351 WIPER / WASHER _0235980 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


PROCEDURE

Hide 84650 1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E146421

Engage the claw and install the wiper switch.


b.

Connect the 2 connectors.


Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

a.
E146420

Engage the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.


b.

Engage the claw to install the upper steering column cover.


Hide 45287 3.INSTALL LOWER STEERING COLUMN COVER

a.
E146419

Engage the 2 claws to install the lower steering column cover.

NOTICE:

Do not damage the tilt and telescopic switch.



b.

While turning the steering wheel to the right and left, install the 2 screws and the lower steering column cover.


Hide 55046A 4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH