Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT WHEEL
53879
2.REMOVE FRONT FENDER LINER
3.INSTALL BRAKE PEDAL PRESSURE
4.REMOVE FRONT FLEXIBLE HOSE
Release the 11 mm union nut (1) on the brake tube, use the hexagon head (2) for counter support if necessary.
Release the 11 mm union nut (1) on the front flexible hose, use the knurling (2) for counter support if necessary.
Detach the front flexible hose from the bracket (3).