81570
1.REMOVE CENTER STOP LIGHT ASSEMBLY
2.REMOVE NO. 1 AMPLIFIER ANTENNA ASSEMBLY
Electrostatic discharge.
Damage to or destruction of electrical components.
Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Antistatic work clothing and antistatic shoes (with ESD symbol).
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
Unlock plug connections (1) and disconnect.
Loosen T25 screw (2).
Remove the No. 1 amplifier antenna assembly (3).
67751
3.REMOVE BACK DOOR TRIM BOARD
4.REMOVE MULTIPLE-BAND AERIAL