Home › Vehicle Exterior › DOOR / HATCH › HOOD
RM3650E _59 Vehicle Exterior _080029 DOOR / HATCH _0388185 HOOD A

DOOR / HATCH  HOOD  REASSEMBLY  


PROCEDURE

Hide 55878B 2.INSTALL COWL VENT COVER LH

Hide 55877B 3.INSTALL COWL VENT COVER RH

Hide 53333 4.INSTALL HOOD LOCK STRIKER

HINT:

Perform the operations on the left and right side.


a.
B506415

Install hood lock striker (2) on the hood sub-assembly.


b.

Tighten nuts (1).

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 53014 5.INSTALL FRONT SIDE AIR GUIDE SUB-ASSEMBLY LH

a.
B506417

Install a new front side air guide sub-assembly LH (1).


Hide 53013A 6.INSTALL FRONT SIDE AIR GUIDE SUB-ASSEMBLY RH

HINT:

Perform the operations on the left and right side.


Hide 7.INSTALL BRACKET FOR JET CHAIN

a.
B506414

Install all brackets for jet chain.


Hide 8.INSTALL CUSHION

a.
B506413

Install all cushions.


Hide 53301 9.ADJUST HOOD SUB-ASSEMBLY

Hide 85380 10.INSTALL FRONT WASHER NOZZLE AND HOSE ASSEMBLY

Hide 75601D 12.INSTALL HOOD MOULDING RH

HINT:

Use the same procedure as for the LH side.