Home › Engine / Hybrid System › B48 (LUBRICATION) › OIL PRESSURE SENSOR
RM3650E _51 Engine / Hybrid System _080065 B48 LUBRICATION _0388371 OIL PRESSURE SENSOR A

B48 LUBRICATION  OIL PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89637C 1.INSTALL OIL PRESSURE SENSOR

a.

Guide in and install the oil pressure sensor.


b.

Using a 24 mm deep socket wrench, tighten the oil pressure sensor.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)


c.

Connect and lock the connector.

HINT:

The connector must engage audibly.



Hide 3.INSPECT FOR ENGINE OIL LEAK