Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the driver side and front passenger side.
The procedure listed below is for the driver side.
1.INSTALL FRONT SEATBACK HEATER ASSEMBLY
Front seatback heater assembly is bonded with the separate type front seatback pad and cannot be separated from each other without causing damage. Separate type front seatback pad and front seatback heater assembly must be replaced.
Replace the separate type front seatback pad (2).
Position and align the front seatback heater assembly (1) on the separate type front seatback pad (2) correctly.
Bond the front seatback heater assembly (1) to the separate type front seatback pad (2) correctly.
71074S
2.INSTALL SEPARATE TYPE FRONT SEATBACK COVER
71842
3.INSTALL FRONT SEATBACK GARNISH
4.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
73920A
5.INSTALL FRONT SEAT AIRBAG ASSEMBLY
71812D
6.INSTALL FRONT SEAT CUSHION SHIELD
72495
7.INSTALL VERTICAL ADJUSTING HANDLE
8.INSTALL NO. 2 RECLINING ADJUSTER RELEASE ARM
71822
9.INSTALL FRONT SEAT SIDE SHIELD
71862
10.INSTALL FRONT SEAT CUSHION INNER SHIELD
11.INSTALL FRONT SEAT ASSEMBLY