1.REMOVE WHEEL ASSEMBLY
65637
2.REMOVE REAR WHEEL HOUSE LINER RH
57628E
3.REMOVE REAR FLOOR SIDE MEMBER COVER LH
77201
4.REMOVE FUEL TANK INLET PIPE SUB-ASSEMBLY
Unlock and pull off snap fastener (1).
Unclip tank ventilation line from brackets (2).
Unlock and pull off snap fastener (1).
Loosen nuts (2) and (3).
Loosen hose clamp (1).
Pull the rubber hose (2) off the fuel tank.
Guide out fuel filler pipe (1) downwards with the corresponding tank ventilation line.