Home › Engine / Hybrid System › B58 (FUEL) › FUEL-FILLER PIPE
RM3650E _51 Engine / Hybrid System _080099 B58 FUEL _0388623 FUEL-FILLER PIPE A

B58 FUEL  FUEL-FILLER PIPE  INSTALLATION  


PROCEDURE

Hide 77201 1.INSTALL FUEL TANK INLET PIPE SUB-ASSEMBLY

a.
A442266

Thread the fuel filler pipe (1) with the associated tank ventilation line upward.


b.
A442264

Connect the rubber hose (2) with the fuel tank.


c.

Replace the hose clamp (1).


d.

Tighten the hose clamp (1).

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


e.

Connect and lock the snap fastener (1).


f.
A442263

Tighten nuts (2) and (3).

Torque:
3.3 N*m (34 kgf*cm, 29 in.*lbf)


g.
A442262

Connect and lock the snap fastener (1).


h.

Clip the tank ventilation line into the brackets (2).


i.
A442267

Check the sealing lip (1) on the wheel arch for correct fit.


Hide 57628E 2.INSTALL REAR FLOOR SIDE MEMBER COVER LH

Hide 65637 3.INSTALL REAR WHEEL HOUSE LINER RH

Hide 4.INSTALL WHEEL ASSEMBLY