Working on 12 V vehicle electrical system.
Risk of short circuits! Risk of fire!
Disconnect the cable from the negative (-) battery terminal.
Electrostatic discharge.
Damage to or destruction of electrical components.
Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
Anti static work clothing and antistatic shoes (with ESD symbol).
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
58920C
1.REMOVE FRONT CONSOLE ARMREST ASSEMBLY
58822
2.REMOVE CONSOLE SIDE PANEL
58821A
3.REMOVE CONSOLE PANEL AND CONSOLE PANEL RETAINER
55432B
4.REMOVE INSTRUMENT PANEL FINISH LOWER PANEL
55318F
5.REMOVE NO. 2 INSTRUMENT SIDE PANEL
55011A
6.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY
89611
7.REMOVE PUSH START SWITCH
Detach push start switch (1) at the latch mechanisms (2) and remove.