Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
51219
1.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR
17882
2.REMOVE NO. 2 AIR CLEANER HOSE
11401T
3.REMOVE CYLINDER BLOCK COVER
4. DRAIN ENGINE COOLANT (for High Temperature)
16321
5.REMOVE WATER INLET
Loosen T30 bolts (2).
Remove the No. 2 water by-pass hose (1) and tie it to the side.
Unlock retaining clip (3).
Remove No. 1 radiator hose (4).
Loosen T30 bolts (1).
Pull off and remove the water inlet (2).