Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
12180E
1.REMOVE OIL FILLER CAP ASSEMBLY
12101A
2.REMOVE OIL PAN DRAIN PLUG
12101A
3.INSTALL OIL PAN DRAIN PLUG
12601B
4.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
17700
5.REMOVE AIR CLEANER ASSEMBLY
89467A
6.REMOVE WIDE RANGE AIR FUEL RATIO SENSOR
89465
7.REMOVE OXYGEN SENSOR
13540
8.REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Have a cloth ready.
A small amount of engine oil emerges during the removal of the No. 1 chain tensioner assembly (1).
Release the No. 1 chain tensioner assembly (1).