Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
12601B
1.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
12180E
2.REMOVE OIL FILLER CAP ASSEMBLY
15620
3.REMOVE OIL FILTER CAP ASSEMBLY
51219
4.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR
5.DRAIN ENGINE COOLANT (for High Pressure)
12101A
6.REMOVE OIL PAN DRAIN PLUG
12101A
7.INSTALL OIL PAN DRAIN PLUG
8.SEPARATE OIL COOLER TUBE
15710
9.REMOVE OIL COOLER ASSEMBLY
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.
Make sure that there are no particles or impurities in the medium openings. Coolant or foreign substances in the oil can cause engine damage such as damage to the connecting rod bearing.
Loosen T30 bolts (1) to (6).
Remove the oil cooler assembly from the oil filter bracket.