Home › Engine / Hybrid System › B58 (LUBRICATION) › ENGINE OIL COOLER
RM3650E _51 Engine / Hybrid System _080066 B58 LUBRICATION _0393836 ENGINE OIL COOLER A

B58 LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

NOTICE:
·

Make sure that there are no particles or impurities in the medium openings. Coolant or foreign substances in the oil can cause engine damage such as damage to the connecting rod bearing.


·

Damage to the surface.

The use of metal-cutting tools (e.g. sandpaper) to clean the surfaces can damage them and lead to leaks or engine damage.

-

Do not use any metal-cutting tools.




a.
A441330

Clean sealing surface (1) on oil cooler assembly.


b.
A441329

Replace oil cooler gaskets (1) to (4).


c.

Install oil cooler gaskets (1) to (4).


d.
A441328

Position the oil cooler assembly on the oil filter bracket.


e.

Make sure oil cooler gaskets are correctly seated.


f.

Tighten T30 bolts in the order (1) to (6).

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 2.INSTALL OIL COOLER TUBE

Hide 15620 3.INSTALL OIL FILTER CAP ASSEMBLY

Hide 12180E 5.INSTALL OIL FILLER CAP ASSEMBLY

Hide 12601B 6.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 7.ADD ENGINE COOLANT (for High Pressure)

Hide 8.INSPECT FOR COOLANT LEAK (for High Temperature)

Hide 51219 9.INSTALL FRONT SUSPENSION MEMBER LOWER PROTECTOR

Hide 10.INSPECT FOR ENGINE OIL LEAK