Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
85010
1.REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY
53383
2.REMOVE HOOD TO COWL TOP SEAL
53681
3.REMOVE UPPER FRONT SUSPENSION CENTER BRACE
12601B
4.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
55788A
5.REMOVE COWL TOP VENTILATOR LOUVER PROTECTOR
12611
6.REMOVE NO. 1 ENGINE COVER
50819
7.REMOVE FRONT FLOOR COVER
23827A
8.REMOVE NO. 2 FUEL VAPOR FEED HOSE
Unlock and disconnect snap fastener (1) of the No. 2 fuel vapor feed hose (2).
Unclip the vehicle wiring harness (1) with the bracket (2) and place aside.
Unlock and disconnect snap fastener (1) of the No. 2 fuel vapor feed hose (2).
Unclip No. 2 fuel vapor feed hose (2) from the bracket (3).
Guide out No. 2 fuel vapor feed hose (2) upwards.