Home › Engine / Hybrid System › B58 (STARTING) › ENGINE SWITCH
RM3650E _51 Engine / Hybrid System _080073 B58 STARTING _0395904 ENGINE SWITCH A

B58 STARTING  ENGINE SWITCH  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Disconnect the cable from the negative (-) battery terminal.




NOTICE:
·

Electrostatic discharge.

·

Damage to or destruction of electrical components.

-

Leave electrical components in original packaging until just before they are installed. Use the original packaging only for any return shipments. Always package removed components straight away.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

Anti static work clothing and antistatic shoes (with ESD symbol).

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




PROCEDURE

Hide 58920C 1.REMOVE FRONT CONSOLE ARMREST ASSEMBLY

Hide 58822 2.REMOVE CONSOLE SIDE PANEL

Hide 58821A 3.REMOVE CONSOLE PANEL AND CONSOLE PANEL RETAINER

Hide 55432B 4.REMOVE INSTRUMENT PANEL FINISH LOWER PANEL

Hide 55318F 5.REMOVE NO. 2 INSTRUMENT SIDE PANEL

Hide 55011A 6.REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

Hide 89611 7.REMOVE PUSH START SWITCH

a.
A442545

Detach push start switch (1) at the latch mechanisms (2) and remove.