Electrostatic discharge.
Damage to or destruction of electrical components.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Click hereGeneral>MAINTENANCE>B58 BATTERY>REMOVAL
55877B
2.REMOVE COWL VENT COVER RH
3.REMOVE COOLING FAN RELAY
Unlock connector (1) and disconnect.
Remove cap (2).
Unclip caps (3).
Remove the rubber grommet (1) from the cooling fan relay.
Loosen nuts (2).
Remove the battery cables from the cooling fan relay.
Loosen T25 screw (1).
Swing the cooling fan relay (2) out of the bracket and remove.