Home › Engine / Hybrid System › B58 (EMISSION CONTROL) › FUEL TANK VENTILATION HOSE
RM3650E _51 Engine / Hybrid System _080101 B58 EMISSION CONTROL _0400412 FUEL TANK VENTILATION HOSE A

B58 EMISSION CONTROL  FUEL TANK VENTILATION HOSE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




PROCEDURE

Hide 12601B 1.REMOVE NO.1 ENGINE COVER SUB-ASSEMBLY

Hide 17880 3.REMOVE AIR CLEANER HOSE ASSEMBLY

Hide 4.REMOVE TANK VENTILATION LINE

NOTICE:
·

Electrostatic discharge.

Damage to or destruction of electrical components.

-

Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.

-

For additional information see:

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION




a.
A442254

Unlock and disconnect the tank ventilation line (1).


b.

Loosen the tank ventilation line (1) from the clamp (2).


c.
A442255

Unclip clamp (1).


d.

Unlock plug connection (2) and disconnect.


e.

Unlock plug connection (3) and disconnect.


f.

Unlock and disconnect the tank ventilation line (4).


g.

Unlock and disconnect the tank ventilation line (1).


h.
A442256

Thread out and remove the tank ventilation line (1).