| *A | for 2 Port Type |
| *B | for 6 Port Type |
Check the shape of the Turbo Charger SUB-ASSY before doing removal/installation work.
17201
1.REMOVE TURBOCHARGER SUB-ASSEMBLY
16028
2.REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY (for 2 Port Type)
16028
3.REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY (for 6 Port Type)
15407
4.REMOVE INLET TURBO OIL PIPE SUB-ASSEMBLY (for 2 Port Type)
15407
5.REMOVE INLET TURBO OIL PIPE SUB-ASSEMBLY (for 6 Port Type)
16027
6.REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY (for 2 Port Type)
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Collect and dispose of emerging fluids. Observe country specific waste disposal regulations.
Turn the No. 1 turbo water pipe sub-assembly (1) in direction of arrow and remove to the top.
16027
7.REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY (for 6 Port Type)
Hot fluids.
Risk of scalding!
Conduct all work in the vehicle wearing appropriate personal protective equipment only.
Collect and dispose of emerging fluids. Observe country specific waste disposal regulations.
Turn the No. 1 turbo water pipe sub-assembly (1) in direction of arrow and remove to the top.