Scratches.
Tools and sharp-edged components can cause scratches.
Protect working area.
Handle tools and components carefully.
87834
1.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER
87810
2.REMOVE INNER REAR VIEW MIRROR ASSEMBLY
89941
3.REMOVE RAIN SENSOR
8646C
4.REMOVE FORWARD RECOGNITION CAMERA (w/ Toyota Supra Safety)
5.REMOVE ELECTRONIC TOLL COLLECTION DEVICE (w/ Electronic Toll Collection System)
62212
6.REMOVE FRONT PILLAR GARNISH LH
62211
7.REMOVE FRONT PILLAR GARNISH RH
Use the same procedure as for the LH side.
55781E
8.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY
75552E
9.REMOVE ROOF DRIP SIDE FINISH MOULDING LH
75551E
10.REMOVE ROOF DRIP SIDE FINISH MOULDING RH
Use the same procedure as for the LH side.
56111
11.REMOVE WINDSHIELD GLASS
Tape off body in area of piercing point with protective tape.
Push the thread along the line (1) through the adhesive bead (2) from the inside.
Cut out the windshield glass with a piano wire.
Using suction cups, remove windshield glass.
75533E
12.REMOVE WINDSHIELD OUTSIDE MOULDING
When reusing the windshield glass:
Remove the windshield outside moulding (1).