VEHICLE STABILITY CONTROL SYSTEM (for Vacuum Brake Booster) > DIAGNOSIS SYSTEM |
| DIAGNOSIS |
If the skid control ECU detects a malfunction, the ABS and/or BRAKE warning lights and the slip indicator lights come on in accordance with the trouble area to warn the driver.
| WARNING LIGHT AND INDICATOR LIGHT CHECK |
Release the parking brake.
Check that the ABS warning light, BRAKE warning light and slip indicator light come on when the ignition switch is turned to ON, and go off in approximately 3 seconds.
| Trouble Area | See Procedure |
| ABS warning light circuit (Remains on) |
Click here
|
| ABS warning light circuit (Does not come on) |
Click here
|
| BRAKE warning light circuit (Remains on) |
Click here
|
| BRAKE warning light circuit (Does not come on) |
Click here
|
| Slip indicator light circuit (Remains on) |
Click here
|
| Slip indicator light circuit (Does not come on) |
Click here
|