FRONT SEAT OUTER BELT ASSEMBLY (for Regular Cab) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT SEAT ASSEMBLY |
for Manual Seat:
Remove the front seat (Click here).
for Power Seat:
Remove the front seat (Click here).
| 3. REMOVE FRONT DOOR SCUFF PLATE |
![]() |
Detach the 6 claws and 3 clips, and remove the scuff plate.
| 4. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP |
Partially remove the front door opening trim weatherstrip so that the lower quarter trim panel assembly can be removed .
| 5. REMOVE UPPER BACK PANEL GARNISH |
![]() |
Detach the 10 clips and remove the back panel garnish.
| 6. REMOVE LUGGAGE COMPARTMENT BOX LH |
![]() |
Remove the 2 clips.
Detach the 3 claws and remove the luggage compartment box.
| 7. REMOVE LUGGAGE COMPARTMENT BOX RH |
![]() |
Remove the 4 clips and luggage compartment box.
| 8. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY |
![]() |
Detach the 2 claws and remove the cover.
![]() |
Remove the bolt and seat belt anchor.
![]() |
Detach the 7 clips and remove the quarter trim panel.
| 9. REMOVE FRONT SEAT OUTER BELT ASSEMBLY |
![]() |
Using a screwdriver, detach the 2 claws and open the seat belt anchor cover as shown in the illustration.
![]() |
Remove the bolt and disconnect the seat belt's shoulder anchor.
![]() |
Disconnect the pretensioner connector as shown in the illustration.
![]() |
Remove the 2 bolts and seat belt.