Home › COMMUNICATION SYSTEM › CAN COMMUNICATION › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here


HINT:
If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.


CAN communication system: 
DTC Code
Detection Item
Trouble Area
See page
U0199
Lost Communication with "Door Control Module A"
- Power source circuit of outer mirror control ECU
- Outer mirror control ECU
- Outer mirror control ECU branch wire or connector
Click here
U0208
Lost Communication with "Seat Control Module A"
- Power source circuit of front power seat control ECU and switch LH
- Front power seat control ECU and switch LH
- Front power seat control ECU and switch LH branch wire or connector
Click here
U1002
Lost Communication with Gateway Module
- MS bus circuit
- Outer mirror control ECU branch wire or connector
- Front power seat control ECU and switch LH branch wire or connector
- Multiplex tilt and telescopic ECU branch wire or connector
- Main body ECU main wire or connector
- Combination meter ECU main wire or connector
- Outer mirror control ECU
- Front power seat control ECU and switch LH
- Multiplex tilt and telescopic ECU
- Main body ECU
- Combination meter ECU
- No. 3 junction connector
Click here
U1115
Lost Communication with Tilt and Telescopic Module
- Power source circuit of multiplex tilt and telescopic ECU
- Multiplex tilt and telescopic ECU
- Multiplex tilt and telescopic ECU branch wire or connector
Click here