Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO COMPONENT AMPLIFIER

STEREO COMPONENT AMPLIFIER > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. Some systems need to be initialized after the cable is reconnected (Click here).
  2. After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.



2. REMOVE FRONT SEAT ASSEMBLY RH
  1. for Manual Seat:
    Remove the front seat RH (Click here).

  1. for Power Seat:
    Remove the front seat RH (Click here).



3. REMOVE AUDIO AMPLIFIER COVER


B168143
  1. Detach the 3 clips and remove the cover.



4. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY


B166266
  1. Disconnect the 3 connectors.

  1. Remove the 3 bolts and amplifier.