Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM (for SD)

NAVIGATION SYSTEM (for SD) > Panel Switches do not Function

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK PANEL SWITCH
  1. Check for foreign matter around the switch that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2.CHECK PANEL SWITCH (DISPLAY CHECK MODE)


    E225786
  1. Enter the "Function Check/Setting I" and select "Panel&Steering Switch" (Click here).

  1. Operate the abnormal switch and check if the switch name and status are correctly displayed.

    OK:
    The number of switches pushed and the switch status are correctly displayed.

    Result 
    Result
    Proceed to
    OK (for Column Shift Type)
    A
    OK (for Floor Shift Type)
    B
    NG
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)

C
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
A

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)