NAVIGATION SYSTEM (for SD) > Display does not Dim when Light Control Switch is Turned ON |
| 1.CHECK IMAGE QUALITY SETTING |
![]() |
Display the "Display" screen.
Turn the light control switch to the tail or head position.
Check if "Day Mode" setting on the display adjustment screen is on.
| *a | Example |
|
| ||||
| OK | |
| 2.CHECK VEHICLE SIGNAL (DISPLAY VEHICLE SIGNAL) |
![]() |
Enter the "Function Check/Setting I" mode and select "Vehicle Signal" (Click here).
Check that the display changes between ON and OFF according to the light control switch operation.
| Light Control Switch Condition | Display Condition |
| TAIL or HEAD | ON |
| OFF | OFF |
| Result | Proceed to |
| OK (for Column Shift Type) | A |
| OK (for Floor Shift Type) | B |
| NG | C |
|
| ||||
|
| ||||
| A | ||
| ||