NAVIGATION SYSTEM (for SD) > Voice is not Recognized |
| 1.CHECK NAVIGATION SETTING |
![]() |
Display the "Voice Settings" screen.
Check that "Voice Recognition Prompts" is not "Off".
| *a | Example |
|
| ||||
| OK | |
| 2.CHECK SD CARD |
Check that the SD card is not deformed or cracked.
|
| ||||
| OK | |
| 3.CHECK MICROPHONE AND VOICE RECOGNITION (OPERATION CHECK) |
![]() |
Enter the "Microphone&Voice Recognition Check" screen (Click here).
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
| Result | Proceed to |
| OK (for Column Shift Type) | A |
| OK (for Floor Shift Type) | B |
| NG | C |
|
| ||||
|
| ||||
| A | ||
| ||