NAVIGATION SYSTEM (for SD) > The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted |
| 1.CHECK CELLULAR PHONE |
Check if the other caller can hear your voice properly.
|
| ||||
| OK | |
| 2.CHECK SETTINGS |
![]() |
Display the "Call" screen.
Check if the "Mute" switch is set to on.
| *a | Example |
|
| ||||
| OK | |
| 3.CHECK MICROPHONE |
![]() |
Enter the "Microphone&Voice Recognition Check" screen (Click here).
When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
Push the recording switch and perform voice recording.
Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
| Result | Proceed to |
| OK (for Column Shift Type) | A |
| OK (for Floor Shift Type) | B |
| NG | C |
|
| ||||
|
| ||||
| A | ||
| ||