OIL COOLER > REMOVAL |
| 1. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
Remove the radiator cap. Then drain the coolant from the radiator.
Loosen the 2 cylinder block drain cock plugs. Then drain the coolant from the engine.
Tighten the 2 cylinder block drain cock plugs.

Tighten the radiator drain cock plug by hand.
| 2. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
for Regular Cab Standard Deck:
Remove the front exhaust pipe (Click here).
except Regular Cab Standard Deck:
Remove the front exhaust pipe (Click here).
| 3. DISCONNECT WATER BY-PASS PIPE ASSEMBLY |
![]() |
Remove the bolt and disconnect the 2 water by-pass hoses from the transmission oil cooler to disconnect the water by-pass pipe.
| 4. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/o Trailer Towing System) |
![]() |
Disconnect the 2 No. 1 transmission oil cooler hoses from the transmission.
Remove the 3 bolts and transmission oil cooler with transmission oil cooler spacer.
Remove the 2 No. 1 transmission oil cooler hoses from the transmission oil cooler spacer.
![]() |
Remove the 3 bolts and transmission oil cooler from the transmission oil cooler spacer.
Remove the 2 O-rings from the grooves of the transmission oil cooler.
| 5. REMOVE TRANSMISSION OIL COOLER ASSEMBLY (w/ Trailer Towing System) |
![]() |
Disconnect the No. 2 transmission oil cooler inlet hose and No. 2 transmission oil cooler outlet hose from the transmission oil thermostat.
Disconnect the No. 2 transmission oil cooler inlet hose and No. 2 transmission oil cooler outlet hose from the oil cooler tube, and remove them.
![]() |
Disconnect the 2 No. 1 transmission oil cooler hoses from the transmission.
Remove the 3 bolts and transmission oil cooler with transmission oil thermostat.
Remove the 2 No. 1 transmission oil cooler hoses from the transmission oil thermostat.
![]() |
Remove the 3 bolts and oil cooler from the transmission oil thermostat.
Remove the 2 O-rings from the grooves of transmission oil cooler.
| 6. REMOVE OIL COOLER ACCESSORY ASSEMBLY (w/ Trailer Towing System) |
![]() |
Disconnect the 2 hoses from the No. 2 oil cooler tube.
Detach the claw to open the No. 1 flexible hose clamp.
Disconnect the 2 hoses from the oil cooler tube and remove the oil cooler accessory assembly.
| 7. REMOVE COOLER CONDENSER ASSEMBLY (AIR COOLED OIL COOLER) (w/ Trailer Towing System) |
Remove the cooler condenser (Click here).
| 8. REMOVE NO. 2 OIL COOLER TUBE |
![]() |
Disconnect the No. 4 oil cooler inlet hose and No. 4 oil cooler outlet hose from the cooler condenser.
Remove the bolt and No. 2 oil cooler tube together with the 2 oil cooler hoses.
Remove the No. 4 oil cooler inlet hose and No. 4 oil cooler outlet hose from the No. 2 oil cooler tube.
| 9. REMOVE OIL COOLER TUBE (w/ Trailer Towing System) |
![]() |
Remove the 2 bolts and oil cooler tube.