DTC B1445/45 Passenger Side Cool Air Bypass Damper Control |
| DTC Code | DTC Detection Condition | Trouble Area |
| B1445/45 | Cool air bypass servo motor position sensor value does not change even if air conditioning amplifier operates cool air bypass servo motor |
|

| 1.READ VALUE USING TECHSTREAM (COOL AIR BYPASS SERVO MOTOR TARGET PULSE) |
Use the Data List to check if the servo motor is functioning properly.
| Tester Display | Measurement Item / Range | Normal Condition | Diagnostic Note |
| Cool Air Bypass Pulse | Cool air bypass servo motor target pulse / Min.: 0, Max.: 255 | Open: 8 (pulse) Close: 50 (pulse) | - |
| Result | Proceed to |
| OK (Checking from the DTC) | A |
| OK (Checking from the PROBLEM SYMPTOMS TABLE) | B |
| NG | C |
|
| ||||
|
| ||||
| A | |
| 2.REPLACE COOL AIR BYPASS SERVO MOTOR (for Passenger Side) |
Temporarily replace the cool air bypass servo motor with a new one (Click here).
| NEXT | |
| 3.CHECK FOR DTC |
Clear the DTC (Click here).
Check for DTC (Click here).
|
| ||||
| OK | ||
| ||
| 4.REPLACE AIR CONDITIONING HARNESS |
Replace the air conditioning harness.
| NEXT | |
| 5.CHECK FOR DTC |
Clear the DTC (Click here).
Check for DTC again (Click here).
|
| ||||
| OK | ||
| ||