Home › Engine / Hybrid System › 1UR-FE ENGINE CONTROL › KNOCK SENSOR
RM27M0U _51 Engine / Hybrid System _049093 1UR-FE ENGINE CONTROL _0233899 KNOCK SENSOR A

1UR-FE ENGINE CONTROL  KNOCK SENSOR  REMOVAL  


PROCEDURE

Hide 17111 1.REMOVE INTAKE MANIFOLD

Hide 16293 2.DISCONNECT NO. 10 WATER BY-PASS HOSE

a.
A313309

Slide the clamp and remove the No. 10 water by-pass hose from the separator case.


Hide 16297 3.DISCONNECT NO. 9 WATER BY-PASS HOSE

a.
A313310

Slide the clamp and remove the No. 9 water by-pass hose from the separator case.


Hide 12215 4.REMOVE SEPARATOR CASE

a.
A272394

Remove the 4 bolts and separator case.


Hide 89615 5.REMOVE KNOCK SENSOR

a.
A215436

Disconnect the 4 knock sensor connectors.


b.

Remove the 4 bolts and 4 knock sensors.