17111
1.REMOVE INTAKE MANIFOLD
11212
2.REMOVE NO. 2 CYLINDER HEAD COVER
12611
3.REMOVE NO. 1 ENGINE COVER
16297
4.DISCONNECT NO. 9 WATER BY-PASS HOSE
Slide the clamp and disconnect the No. 9 water by-pass hose from the separator case.
16293
5.DISCONNECT NO. 10 WATER BY-PASS HOSE
Slide the clamp and disconnect the No. 10 water by-pass hose from the separator case.
12215
6.REMOVE SEPARATOR CASE
Remove the 4 bolts and separator case.
89615
7.REMOVE KNOCK SENSOR
Disconnect the 4 knock sensor connectors.
Remove the 4 bolts and 4 knock sensors.