Home › Engine / Hybrid System › 3UR-FBE EMISSION CONTROL › AIR SWITCHING VALVE
RM27M0U _51 Engine / Hybrid System _049099 3UR-FBE EMISSION CONTROL _0233974 AIR SWITCHING VALVE A

3UR-FBE EMISSION CONTROL  AIR SWITCHING VALVE  REMOVAL  


PROCEDURE

Hide 17104 1.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY

Hide 17111 2.REMOVE INTAKE MANIFOLD

Hide 16711 3.REMOVE FAN SHROUD

Hide 16297 4.REMOVE NO. 9 WATER BY-PASS HOSE

a.
A307663E04
2.177,0.094 2.292,0.094 2.292,0.094 2.417,0.458 true 1.146,0.74 1.313,0.74 1.313,0.74 1.823,1.146 true 0.927,0.646 1.104,0.844 0.177,0.198 10 true *1 1.969,0.01 2.156,0.208 0.188,0.198 10 false *2

Slide the 2 clamps and remove the No. 9 water by-pass hose from the separator case and front water by-pass joint.

Text in Illustration
*1 No. 9 Water By-pass Hose
*2 No. 10 Water By-pass Hose


Hide 16293 5.REMOVE NO. 10 WATER BY-PASS HOSE

a.

Slide the 2 clamps and remove the No. 10 water by-pass hose from the front water by-pass joint and water inlet housing.


Hide 16261 6.REMOVE NO. 1 WATER BY-PASS HOSE

a.
A307665E03
1.323,0.104 1.115,0.104 1.115,0.104 0.635,0.375 true 1.25,1.75 1.25,1.365 false 1.188,1.792 1.375,1.969 0.188,0.177 10 false *1 1.354,0.021 1.604,0.219 0.25,0.198 10 false *2

Slide the 2 clamps and remove the No. 1 water by-pass hose from the front water by-pass joint.

Text in Illustration
*1 No. 1 Water By-pass Hose
*2 No. 2 Water By-pass Hose


Hide 16264D 7.DISCONNECT NO. 2 WATER BY-PASS HOSE

a.

Slide the clamp and disconnect the No. 2 water by-pass hose from the front water by-pass joint.


Hide 16206 8.DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A158578

Remove the 3 bolts and disconnect the No. 2 water by-pass pipe sub-assembly.


Hide 11212 9.REMOVE NO. 2 ENGINE COVER

A307666

Hide 77285D 10.DISCONNECT FUEL TUBE CLAMP

a.
A158580

Disconnect the fuel tube clamp from the bracket.


Hide 12611 11.REMOVE NO. 1 ENGINE COVER

A158581

Hide 16355 12.REMOVE FRONT WATER BY-PASS JOINT

a.

Disconnect the engine coolant temperature sensor connector.


b.
A307708

Remove the 4 nuts, front water by-pass joint and 2 gaskets.


Hide 16279 13.REMOVE NO. 3 WATER BY-PASS PIPE

A307664

HINT:

Perform this procedure only when replacement of the No. 3 water by-pass pipe is necessary.


a.

Remove the bolt and No. 3 water by-pass pipe.


Hide 17361 14.REMOVE AIR TUBE

a.
A158575E08
1,0.219 0.75,0.219 0.75,0.219 0.385,1.01 true 1.375,1.917 2.083,1.667 2.083,1.667 2.688,1.667 true 2.719,1.573 2.927,1.74 0.208,0.167 10 false *1 1.031,0.125 1.281,0.302 0.25,0.177 10 true *2

Slide the 2 clamps and disconnect the No. 2 air hose and No. 3 air hose.

Text in Illustration
*1 No. 2 Air Hose
*2 No. 3 Air Hose


b.

Disconnect the air pump connector.


c.

Disconnect the air pump connector clamp holder.


d.

Using a clip remover, detach the wire harness claw.


e.
A158582

Remove the 2 bolts and air tube.


f.

Disconnect the 2 No. 1 air hoses from the air tube.


Hide 25710 15.REMOVE AIR SWITCHING VALVE ASSEMBLY

a.
A158583

Disconnect the knock sensor connector.


b.

Remove the bolt and bracket.


c.

Disconnect the 2 air switching valve assembly connectors.


d.
A158586

Remove the 3 bolts and air switching valve assembly.


Hide 17362 16.REMOVE NO. 2 AIR TUBE

a.
A158584

Remove the 2 bolts, No. 2 air tube and gasket.

NOTICE:

Be careful not to damage the installation surface of the gaskets.



Hide 17363Q 17.REMOVE NO. 3 AIR TUBE

a.
A158585

Remove the 2 bolts, No. 3 air tube and gasket.

NOTICE:

Be careful not to damage the installation surface of the gaskets.