Home › Engine / Hybrid System › 1UR-FE FUEL › FUEL PRESSURE REGULATOR
RM27M0U _51 Engine / Hybrid System _049098 1UR-FE FUEL _0233967 FUEL PRESSURE REGULATOR A

1UR-FE FUEL  FUEL PRESSURE REGULATOR  INSTALLATION  


PROCEDURE

Hide 23280 1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

a.

Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the pressure regulator.

NOTICE:
·

Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.

·

When inserting the pressure regulator, be careful not to damage the O-ring.




b.
U151476

While turning the pressure regulator left and right, install it to the delivery pipe.


c.
A161401

Install the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


d.
A161400

Connect the vacuum sensing hose to the pressure regulator.


e.
A161399

Connect the No. 2 fuel tube to the pressure regulator (See page Engine / Hybrid System>1UR-FE FUEL>FUEL SYSTEM>PRECAUTION).


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL