Home › Engine / Hybrid System › 1UR-FE EMISSION CONTROL › EGR COOLER
RM27M0U _51 Engine / Hybrid System _049101 1UR-FE EMISSION CONTROL _0233996 EGR COOLER A

1UR-FE EMISSION CONTROL  EGR COOLER  INSTALLATION  


PROCEDURE

Hide 25602 1.INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY

a.
A214297E01
2.131,0.95 2.516,1.127 0.385,0.177 10 Claw 1.851,0.316 2.923,0.534 1.073,0.218 10 No. 2 EGR pipe 2.126,1.29 3.013,1.492 0.887,0.202 10 EGR Cooler 1.299,1.244 1.884,1.031 1.884,1.031 2.078,1.031 false 1.11,0.62 1.616,0.401 1.616,0.401 1.811,0.401 false 1.263,1.64 1.896,1.368 1.896,1.368 2.091,1.368 false

Install a new gasket and the No. 2 EGR pipe with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

Make sure the gasket's claws are not caught between the No. 2 EGR pipe and EGR cooler.



Hide 25680 2.INSTALL EGR COOLER ASSEMBLY

a.
A214295

Install the EGR cooler with the 2 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 25601 3.INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY

Hide 16294 4.CONNECT NO. 11 WATER BY-PASS HOSE

a.
A214832E03
1.104,0.573 1.51,0.875 1.51,0.875 1.51,1.115 false 1.156,1.135 1.917,1.333 0.76,0.198 10 false Paint Mark 2.583,0.271 3.042,0.469 0.458,0.198 10 false Upper

Connect the No. 11 water by-pass hose.

HINT:

The direction of the hose clamp is indicated in the illustration.



Hide 16296 5.CONNECT NO. 8 WATER BY-PASS HOSE

a.
A214291E03
1.104,0.479 1.521,0.75 1.521,0.75 1.521,1.031 false 2.563,0.167 2.99,0.375 0.427,0.208 10 false Upper 1.156,1.042 1.885,1.229 0.729,0.188 10 false Paint Mark

Connect the No. 8 water by-pass hose.

HINT:

The direction of the hose clamp is indicated in the illustration.



Hide 6.INSTALL NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A214289E03
1.75,0.99 1.75,0.75 1.75,0.75 1.938,0.635 false 1.448,1 2.146,1.156 0.698,0.156 10 false Paint Mark 0.51,0.813 0.792,1 0.281,0.188 10 false 45°

Install the No. 3 water by-pass pipe with the 2 bolts and connect the hose.

HINT:

The direction of the hose clamp is indicated in the illustration.


Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the No. 4 water by-pass hose.


Hide 17111 7.INSTALL INTAKE MANIFOLD ASSEMBLY

a.