Home › Engine / Hybrid System › 1UR-FE ENGINE MECHANICAL › CYLINDER HEAD GASKET(for Bank 2)
RM27M0U _51 Engine / Hybrid System _049107 1UR-FE ENGINE MECHANICAL _0234037 CYLINDER HEAD GASKET(for Bank 2) A

1UR-FE ENGINE MECHANICAL  CYLINDER HEAD GASKET(for Bank 2)  REMOVAL  


PROCEDURE

Hide 17104 1.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

a.

Remove the exhaust manifold RH (See page Engine / Hybrid System>1UR-FE EXHAUST>EXHAUST MANIFOLD>REMOVAL).


Hide 2.REMOVE CAMSHAFTS (for Bank 2)

Hide 13801 3.REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

a.

Remove the 16 valve rocker arms from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 13750 4.REMOVE VALVE LASH ADJUSTER ASSEMBLY

a.

Remove the 16 valve lash adjusters from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 13716 5.REMOVE VALVE STEM CAP

a.

Remove the 16 valve stem caps from the cylinder head.

HINT:

Arrange the removed parts in the correct order.



Hide 11101 6.REMOVE CYLINDER HEAD SUB-ASSEMBLY RH

a.
A160738E08
0.115,0.24 0.219,0.406 0.104,0.167 10 true 1 0.104,0.958 0.208,1.125 0.104,0.167 10 true 2

Uniformly loosen and remove the 2 bolts in the sequence shown in the illustration.


b.
A160739E07
2.708,1.76 2.823,1.917 0.115,0.156 10 true 1 0.604,0.26 0.719,0.417 0.115,0.156 10 true 2 2.698,0.26 2.813,0.417 0.115,0.156 10 true 3 0.563,1.76 0.677,1.917 0.115,0.156 10 true 4 2.156,0.26 2.271,0.417 0.115,0.156 10 true 5 1.104,1.75 1.219,1.906 0.115,0.156 10 true 6 2.188,1.76 2.302,1.917 0.115,0.156 10 true 7 1.125,0.271 1.24,0.427 0.115,0.156 10 true 8 1.646,1.76 1.76,1.917 0.115,0.156 10 true 9 1.583,0.26 1.771,0.417 0.188,0.156 10 true 10

Using a 10 mm bi-hexagon wrench, uniformly loosen the 10 cylinder head bolts in the sequence shown in the illustration. Remove the 10 cylinder head bolts and plate washers.

HINT:

Be sure to arrange the removed parts for each installation position separately.


NOTICE:
·

Be careful not to drop washers into the cylinder head.

·

Head warpage or cracking could result from removing bolts in an incorrect order.




Hide 11115 7.REMOVE CYLINDER HEAD GASKET RH