Home › Engine / Hybrid System › 1UR-FE EXHAUST › EXHAUST MANIFOLD
RM27M0U _51 Engine / Hybrid System _049108 1UR-FE EXHAUST _0234044 EXHAUST MANIFOLD A

1UR-FE EXHAUST  EXHAUST MANIFOLD  REMOVAL  


PROCEDURE

Hide 53736 1.REMOVE FRONT FENDER APRON SEAL RH

a.

Remove the 6 clips and fender apron seal.


Hide 53736A 2.REMOVE FRONT FENDER APRON SEAL REAR RH

a.

Remove the 5 clips and fender apron seal.


Hide 53737B 3.REMOVE FRONT FENDER APRON SEAL LH

a.

Remove the 6 clips and fender apron seal.


Hide 53739A 4.REMOVE FRONT FENDER APRON SEAL REAR LH

a.

Remove the 5 clips and fender apron seal.


Hide 17111 5.REMOVE INTAKE MANIFOLD

Hide 27020 6.REMOVE GENERATOR ASSEMBLY

Hide 88320 7.DISCONNECT COOLER COMPRESSOR ASSEMBLY

Hide 11452 8.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE

a.

Remove the dipstick.


b.
A216301

Remove the bolt and dipstick guide.


c.

Remove the O-ring from dipstick guide.


Hide 9.REMOVE EXHAUST PIPE ASSEMBLY

Hide 37140 10.REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for 4WD)

Hide 58156 11.REMOVE FRONT NO. 4 FLOOR HEAT INSULATOR

a.
A184951

Remove the 4 nuts and front floor heat insulator.


Hide 58155 12.REMOVE FRONT NO. 3 FLOOR HEAT INSULATOR

a.
A184950

Remove the 4 nuts and front floor heat insulator.


Hide 25601 13.REMOVE NO. 1 EGR PIPE SUB-ASSEMBLY

a.
A214293

Remove the 4 nuts and EGR pipe.


b.

Remove the 2 gaskets.


Hide 17168 14.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

a.
A215348

Remove the 3 bolts and heat insulator.


Hide 17105 15.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH

a.
A215349

Remove the 9 nuts, exhaust manifold and 2 gaskets.


Hide 17167 16.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.
A215350

Remove the 3 bolts and heat insulator.


Hide 17104 17.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

a.
A215351

Remove the 9 nuts, exhaust manifold and 2 gaskets.