Home › Engine / Hybrid System › 3UR-FBE COOLING › THERMOSTAT
RM27M0U _51 Engine / Hybrid System _049111 3UR-FBE COOLING _0234053 THERMOSTAT A

3UR-FBE COOLING  THERMOSTAT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:

If the thermostat was not installed, cooling efficiency would decrease. Even if the engine tends to overheat, do not remove the thermostat.


PROCEDURE

Hide 11209 3.REMOVE V-BANK COVER SUB-ASSEMBLY

Hide 16572 4.DISCONNECT OUTLET RADIATOR HOSE

Hide 16031 5.REMOVE WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

a.
A158575E07
0.792,0.135 0.625,0.135 0.625,0.135 0.385,1.01 false 1.375,1.917 2.135,1.542 2.135,1.542 2.385,1.542 false 2.427,1.448 3.135,1.656 0.708,0.208 10 true No. 2 Hose 0.813,0.052 1.573,0.26 0.76,0.208 10 true No. 3 Hose

Disconnect the No. 2 and No. 3 air hoses.


b.

Disconnect the air pump connector.


c.

Disconnect the air pump connector clamp's holder.


d.

Using a clip remover, detach the wire harness clamp.


e.
A151840

Disconnect the No. 5 water by-pass hose.


f.

Remove the air tube bracket bolt.


g.
A151841

Remove the 3 nuts, water inlet with thermostat and gasket.