Home › Engine / Hybrid System › 3UR-FBE COOLING › RADIATOR
RM27M0U _51 Engine / Hybrid System _049111 3UR-FBE COOLING _0234055 RADIATOR A

3UR-FBE COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16400 1.INSTALL RADIATOR ASSEMBLY

a.
A299480

Set the radiator bracket hooks to the radiator support holes.


b.

Install the radiator assembly with the 4 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


Hide 53294C 2.CONNECT RADIATOR SIDE DEFLECTOR LH

a.

Install the 3 clips to connect the radiator side deflector LH.


Hide 53293C 3.CONNECT RADIATOR SIDE DEFLECTOR RH

a.

Install the 3 clips to connect the radiator side deflector RH.


Hide 16711 4.INSTALL FAN SHROUD

a.

Install the fan pulley to the fan bracket.


b.

Place the fan shroud together with the fan with fluid coupling between the radiator assembly and engine.

NOTICE:

Be careful not to damage the radiator core.



c.

Temporarily install the fan with fluid coupling to the fan bracket with the 4 nuts. Tighten the nuts as much as possible by hand.


d.
A151820

Attach the 2 claws of the fan shroud to the radiator assembly as shown in the illustration.


e.

Install the fan shroud with the 2 bolts.

Torque:
6.5 N*m (66 kgf*cm, 58 in.*lbf)


f.
A215580E02
2.677,2.906 2.813,2.906 2.813,2.906 2.677,2.094 false 2.542,2.094 2.813,2.906 false 1.938,2.813 2.708,2.969 0.771,0.156 10 false White Paint

for Condenser with Integrated Oil Cooler:

Pass the 2 hoses through the flexible hose clamp and close the clamp as shown in the illustration.


g.

Connect the reservoir hose to the upper radiator tank.


h.

Install the fan and generator V-belt.


i.
A151842

Tighten the 4 nuts of the fan with fluid coupling.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 16571 5.CONNECT INLET RADIATOR HOSE

a.

Connect the inlet radiator hose to the radiator assembly, and slide the clamp to secure the hose.


Hide 16572 6.CONNECT OUTLET RADIATOR HOSE

a.

Connect the outlet radiator hose to the radiator assembly, and slide the clamp to secure the hose.


Hide 11209 9.INSTALL V-BANK COVER SUB-ASSEMBLY