51441
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
11209
3.REMOVE V-BANK COVER SUB-ASSEMBLY
16571
4.DISCONNECT INLET RADIATOR HOSE
Slide the clip and disconnect the inlet radiator hose from the radiator assembly.
16572
5.DISCONNECT OUTLET RADIATOR HOSE
Slide the clip and disconnect the outlet radiator hose from the radiator assembly.
16711
6.REMOVE FAN SHROUD
Loosen the 4 nuts holding the fan with fluid coupling.
Remove the fan and generator V-belt.
Disconnect the reservoir hose from the upper radiator tank.
for Condenser with Integrated Oil Cooler:
Detach the claw and open the No. 1 flexible hose clamp.
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fan with fluid coupling, and then remove the fan shroud together with the fan with fluid coupling.
Be careful not to damage the radiator core.
Remove the fan pulley from the fan bracket.
53293C
7.DISCONNECT RADIATOR SIDE DEFLECTOR RH
Using a clip remover, remove the 3 clips and disconnect the radiator side deflector RH.
| *a | except Condenser with Integrated Oil Cooler |
| *b | for Condenser with Integrated Oil Cooler |
53294C
8.DISCONNECT RADIATOR SIDE DEFLECTOR LH
Using a clip remover, remove the 3 clips and disconnect the radiator side deflector LH.
16400
9.REMOVE RADIATOR ASSEMBLY
Remove the 4 bolts and radiator assembly.