16400
1.INSTALL RADIATOR ASSEMBLY
Set the radiator bracket hooks to the radiator support holes.
Install the radiator assembly with the 4 bolts.
53294C
2.CONNECT RADIATOR SIDE DEFLECTOR LH
Install the 3 clips to connect the radiator side deflector LH.
53293C
3.CONNECT RADIATOR SIDE DEFLECTOR RH
Install the 3 clips to connect the radiator side deflector RH.
16711
4.INSTALL FAN SHROUD
Install the fan pulley to the fan bracket.
Place the fan shroud together with the fan with fluid coupling between the radiator assembly and engine.
Be careful not to damage the radiator core.
Temporarily install the fan with fluid coupling to the fan bracket with the 4 nuts. Tighten the nuts as much as possible by hand.
Attach the 2 claws of the fan shroud to the radiator assembly as shown in the illustration.
Install the fan shroud with the 2 bolts.
for Condenser with Integrated Oil Cooler:
Pass the 2 hoses through the flexible hose clamp and close the clamp as shown in the illustration.
Connect the reservoir hose to the upper radiator tank.
Install the fan and generator V-belt.
Tighten the 4 nuts of the fan with fluid coupling.
16571
5.CONNECT INLET RADIATOR HOSE
Connect the inlet radiator hose to the radiator assembly, and slide the clamp to secure the hose.
16572
6.CONNECT OUTLET RADIATOR HOSE
Connect the outlet radiator hose to the radiator assembly, and slide the clamp to secure the hose.
7.ADD ENGINE COOLANT
8.INSPECT FOR COOLANT LEAK
11209
9.INSTALL V-BANK COVER SUB-ASSEMBLY
51441
10.INSTALL NO. 1 ENGINE UNDER COVER
53101
11.INSTALL RADIATOR GRILLE SUB-ASSEMBLY