51441
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
11209
3.REMOVE V-BANK COVER SUB-ASSEMBLY
17700
4.REMOVE AIR CLEANER ASSEMBLY
16571
5.REMOVE INLET RADIATOR HOSE
Remove the radiator hose.
16711
6.REMOVE FAN SHROUD
Loosen the 4 nuts holding the fluid coupling fan
Remove the fan and generator V-belt (See page Engine / Hybrid System>1UR-FE ENGINE MECHANICAL>DRIVE BELT>REMOVAL).
Disconnect the reservoir hose from the upper radiator tank.
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the fluid coupling fan.
Be careful not to damage the radiator core.
Remove the fan pulley from the fan bracket.
16361
7.REMOVE FAN
Remove the 4 nuts and fan from the fluid coupling.