Home › Drivetrain › TIRE AND WHEEL › TIRE PRESSURE WARNING SYSTEM
RM27M0U _52 Drivetrain _049120 TIRE AND WHEEL _0234088 TIRE PRESSURE WARNING SYSTEM D

TIRE AND WHEEL  TIRE PRESSURE WARNING SYSTEM  DTC CHECK / CLEAR  


CHECK DTC (USING TECHSTREAM)


a.

Turn the ignition switch off.


b.

Connect the Techstream to the DLC3.


c.

Turn the ignition switch to ON and the Techstream on.


d.

Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.


e.

Read the DTCs following the prompts on the Techstream screen.

HINT:

Refer to the Techstream operator's manual for further details.




CHECK DTC (USING SST CHECK WIRE)


C292264E02
0.99,3.063 0.604,3.375 false 1.24,2.219 0.865,2.698 false 0.229,0.26 0.604,0.51 0.375,0.25 10 false *1 0.229,1.917 0.604,2.167 0.375,0.25 10 false *2 0.458,3.385 0.833,3.635 0.375,0.25 10 false TC 1.292,2.135 1.667,2.385 0.375,0.25 10 false CG 1.896,0.938 2.271,1.188 0.375,0.25 10 false *a 2.177,1.906 2.552,2.156 0.375,0.25 10 false *b 2.646,1.552 3.021,1.802 0.375,0.25 10 false *d 4.802,1.531 5.177,1.781 0.375,0.25 10 false *f 5.458,2.865 5.833,3.115 0.375,0.25 10 false *f 5.26,1.5 5.635,1.75 0.375,0.25 10 false *g 5.656,1.292 6.031,1.542 0.375,0.25 10 false *h 4.875,2.583 5.25,2.833 0.375,0.25 10 false *h 6.156,1.542 6.531,1.792 0.375,0.25 10 false *i 6.542,2.656 6.917,2.906 0.375,0.25 10 false *j 2.854,2.604 3.229,2.854 0.375,0.25 10 false *d 2.177,2.271 2.552,2.521 0.375,0.25 10 false *c 4.573,1.865 4.948,2.115 0.375,0.25 10 false *b 4.573,2.271 4.948,2.521 0.375,0.25 10 false *c 4.5,0.938 4.875,1.188 0.375,0.25 10 false *e

Text in Illustration
*1 Tire Pressure Warning Light *2 DLC3
*a Normal System Code *b ON
*c OFF *d 0.25 sec.
*e Code 13 and 33 *f 0.5 sec.
*g 2.5 sec. *h 1.5 sec.
*i 4.5 sec. *j Repeat

a.

Turn the ignition switch off.


b.

Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST
09843-18040  


c.

Turn the ignition switch to ON.


d.

Read and record any DTCs from the tire pressure warning light on the combination meter. Refer to the illustration above for examples of a normal system code and codes 13 and 33.

HINT:
·

If the tire pressure warning light does not output any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.

Trouble Area See page
Tire pressure warning light circuit (Click here)
TC and CG terminal circuit (Click here)

·

If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is output first.




e.

Refer to the Diagnostic Trouble Code Chart (See page Drivetrain>TIRE AND WHEEL>TIRE PRESSURE WARNING SYSTEM>DIAGNOSTIC TROUBLE CODE CHART) for DTC information.


f.

After completing the check, turn the ignition switch off and remove SST from the DLC3.

SST
09843-18040  



CLEAR DTC


HINT:

After repairing the malfunctions, clear the DTCs.


a.

Turn the ignition switch off.


b.

Connect the Techstream to the DLC3.


c.

Turn the ignition switch to ON and the Techstream on.


d.

Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.


e.

Clear the DTCs following the prompts on the Techstream screen.

HINT:

Refer to the Techstream operator's manual for further details.