Home › Drivetrain › AB60F AUTOMATIC TRANSMISSION / TRANSAXLE › OIL COOLER(w/ Trailer Towing System)
RM27M0U _52 Drivetrain _049125 AB60F AUTOMATIC TRANSMISSION / TRANSAXLE _0234133 OIL COOLER(w/ Trailer Towing System) A

AB60F AUTOMATIC TRANSMISSION / TRANSAXLE  OIL COOLER(w/ Trailer Towing System)  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT BUMPER ASSEMBLY

a.

Remove the front bumper (See page Vehicle Interior>EXTERIOR>FRONT BUMPER>REMOVAL).


Hide 32941 2.DISCONNECT NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE

U152338

a.

Remove the bolt and move the water by-pass pipe so that the 2 oil cooler hoses can be disconnected.


b.

Disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the transmission oil thermostat.


c.

Disconnect the 2 hoses from the oil cooler tube to remove them.

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.



Hide 32930 3.REMOVE OIL COOLER ACCESSORY ASSEMBLY

a.
C209363

Disconnect the 2 hoses from the No. 2 oil cooler tube.

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.



b.

Detach the claw to open the No. 1 flexible hose clamp.


c.

Disconnect the 2 hoses from the oil cooler tube and remove the oil cooler accessory assembly.

NOTICE:

When disconnecting the hoses from the tube, support the tube by hand and be careful to prevent the tube from being deformed.



Hide 32907A 4.REMOVE OIL COOLER TUBE

C161349

a.

Remove the 2 bolts and oil cooler tube.


Hide 88350 5.REMOVE COOLER CONDENSER ASSEMBLY (AIR COOLED OIL COOLER)

a.

Remove the cooler condenser (See page Vehicle Interior>AIR CONDITIONING>CONDENSER>REMOVAL).


Hide 32907 6.REMOVE NO. 2 OIL COOLER TUBE

a.
U152422

Disconnect the No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose from the cooler condenser.


b.

Remove the bolt and No. 2 oil cooler tube together with the 2 oil cooler hoses.


c.

Remove the No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose from the No. 2 oil cooler tube.