Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234292 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  CD/DVD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc.




OK

2.CHECK DISC

NG

CHANGE DISC

2.CHECK DISC
a.
I100151

Disc cleaning

i.

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or antistatic preservative.





OK

END (DISC IS DIRTY)

NG

3.REPLACE DISC WITH ANOTHER AND RECHECK
3.REPLACE DISC WITH ANOTHER AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.




OK

END (DISC IS DEFECTIVE)

NG

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
a.

Check that the radio and display receiver assembly is properly installed

Result
Result Proceed to
OK (for Column Shift Type) A
OK (for Floor Shift Type) B
NG (for Column Shift Type) C
NG (for Floor Shift Type) C



A

B

C

D

REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY