86180
1.INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)
86212C
2.INSTALL NO. 2 RADIO RECEIVER BRACKET
w/o Satellite Radio:
Install the No. 2 radio receiver bracket with the 3 bolts.
w/ Satellite Radio:
Install the No. 2 radio receiver bracket with the 5 bolts.
86211J
3.INSTALL NO. 1 RADIO RECEIVER BRACKET
w/o Satellite Radio:
Install the No. 1 radio receiver bracket with the 3 bolts.
w/ Satellite Radio:
Install the No. 1 radio receiver bracket with the 5 bolts.
86842
4.INSTALL NO. 1 NAVIGATION WIRE (w/ Satellite Radio)
86140A
5.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
Connect each connector.
Insert the radio and display receiver assembly with bracket and attach the 2 guides and 3 clips on its backside.
When inserting the radio receiver, do not press its knobs.
Install the radio and display receiver assembly with bracket with the 4 bolts.
55900
6.INSTALL AIR CONDITIONING CONTROL ASSEMBLY
55479B
7.INSTALL CENTER LOWER INSTRUMENT COVER
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).