Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234292 AUDIO AND VISUAL SYSTEM C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  B15F6  Main Body ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (driver side junction block assembly) cannot be customized via the audio and visual system vehicle customization screen.

HINT:
The main body ECU (driver side junction block assembly) controls the items for the following systems that are customizable via the radio and display receiver assembly screen:
·

Power door lock control system

·

Wireless door lock control system

·

Lighting system



DTC Code DTC Detection Condition Trouble Area
B15F6 Main body ECU (driver side junction block assembly) vehicle setting processing error.
·

CAN communication system

·

Power door lock control system

·

Wireless door lock control system

·

Lighting system

·

Main body ECU (driver side junction block assembly)

·

Radio and display receiver assembly



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM
a.

Use the Techstream to check if the CAN communication system is functioning normally (See page Power Source / Network>CAN COMMUNICATION>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

OK:

CAN communication DTCs are not output.




OK

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

NG

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check if the power door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the power door lock control system.


OK:

No malfunctions are present in the power door lock control system.




OK

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

NG

3.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM
a.

Check if the wireless door lock control system is malfunctioning (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system.


OK:

No malfunctions are present in the wireless door lock control system.




OK

4.CHECK LIGHTING SYSTEM

NG

4.CHECK LIGHTING SYSTEM
a.

Check if the lighting system is malfunctioning (See page Vehicle Interior>LIGHTING>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).

HINT:

Customization may not be possible depending on the malfunction in the lighting system.


OK:

No malfunctions are present in the lighting system.




OK

5.CHECK CUSTOMIZE ITEMS

NG

5.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Customization" screen.


b.

Make a note of the customizable items for each main body ECU (driver side junction block assembly) related system.

HINT:

These items shown as customizable via the radio and display receiver assembly vehicle customization screen can also be changed using the Techstream. In a following step, the Techstream will be used.


i.

To match-up the items in the radio and display receiver assembly with the items on the Techstream, check the customize parameters list for the power door lock control system related items that can be customized via the radio and display receiver assembly screen (See page Vehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS).


ii.

To match-up the items in the radio and display receiver assembly with the items on the Techstream, check the customize parameters list for the wireless door lock control system related items that can be customized via the radio and display receiver assembly screen (See page Vehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).


iii.

To match-up the items in the radio and display receiver assembly with the items on the Techstream, check the customize parameters list for the lighting system related items that can be customized via the radio and display receiver assembly screen (See page Vehicle Interior>LIGHTING>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING).



c.

Using the Techstream, confirm that it is possible to change the settings of the customize parameters that are available for customization via the radio and display receiver assembly screen.

OK:

The items available for customization via the radio and display receiver assembly screen can be customized successfully using the Techstream.


Result
Result Proceed to
OK (for Column Shift Type) A
OK (for Floor Shift Type) B
NG C



A

B

C

REPLACE MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK ASSEMBLY)