This DTC indicates the internal abnormalities of the ECM.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0575 | When either of following conditions is met:
·
Cruise control input signal abnormal ·
Stop light switch input signal abnormal |
ECM |
If DTC P0575 is detected while the cruise control is in operation, the skid control ECU clears the stored vehicle speed in the ECM and cancels the cruise control operation. At the same time, the cruise control indicator light blinks to inform the driver of the malfunction. When this trouble code is detected, fail-safe remains on until the ignition switch is turned OFF.
Clear the DTC (see page Engine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR).
Recheck for DTC (see page Engine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>DTC CHECK / CLEAR).
DTC P0575 is not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for 1UR-FE) | B |
| NG (for 3UR-FE) | C |
| NG (for 3UR-FBE) | D |
A
B
C
D