27020
1.INSTALL GENERATOR ASSEMBLY
Install the generator with the 3 bolts and nut.
Connect the generator connector.
Connect the generator wire with the nut.
Install the terminal cap.
Install the harness bracket to the generator with the bolt.
44320
2.CONNECT VANE PUMP ASSEMBLY
53736
3.INSTALL FRONT FENDER APRON SEAL RH
Install the apron seal with the 5 clips.
16361A
4.INSTALL FAN AND GENERATOR V BELT
51441
5.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
17700
6.INSTALL AIR CLEANER ASSEMBLY
17880
7.INSTALL AIR CLEANER HOSE ASSEMBLY
11209
8.INSTALL V-BANK COVER
28800
9.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL