The air conditioning harness connects the air conditioning amplifier and each servo motor. The air conditioning amplifier supplies power and sends operation instructions to each servo motor through the air conditioning harness. Each servo motor sends the damper position information to the air conditioning amplifier.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1497/97 | Communication line error or open | ·
Air conditioning harness ·
No. 1 damper servo sub-assembly (air mix damper servo motor [for driver side]) ·
No. 1 damper servo sub-assembly (air outlet servo motor) ·
Air mix servo motor (for passenger side) ·
Air inlet servo motor ·
Air cool bypass servo motor ·
Air conditioning amplifier ·
Harness or connector |
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
Select the Active Test, using the Techstream to generate a control command, and then check that the servo motor operates.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Air Mix Servo Targ Pulse (D) | No. 1 damper servo sub-assembly (air mix servo motor [for driver side]) pulse | Min.: 5, Max.: 104 | - |
| Air Mix Servo Targ Pulse (P) | Passenger side air mix servo motor pulse | Min.: 6, Max.: 105 | - |
| Air Outlet Servo Pulse (D) | No. 1 damper servo sub-assembly (air outlet servo motor) pulse | Min.: 9, Max.: 97 | - |
| Air Inlet Damper Targ Pulse | Air inlet damper target pulse | Min.: 7, Max.: 28 | - |
| Cool Air Bypass Pulse | Driver side cool air bypass pulse | Min.: 8, Max.: 50 | - |
Arm of the servo motor selected in the Active Test moves smoothly
| Result | Proceed to |
|---|---|
| One of the servo motors is malfunctioning | A |
| All of the servo motor are malfunctioning | B |
A
B
According to the test, proceed to the next step.
| Result | Proceed to |
|---|---|
| Only the No. 1 damper servo sub-assembly (air mix servo motor [for driver side]) is malfunctioning | A |
| Only the air mix servo motor (for passenger side) is malfunctioning | B |
| Only the No. 1 damper servo sub-assembly (air outlet servo motor) is malfunctioning | C |
| Only the air inlet servo motor is malfunctioning | D |
| Only the cool air bypass servo motor is malfunctioning | E |
A
B
C
D
E
Replace the No. 1 damper servo sub-assembly (air mix servo motor [for driver side]) (See pageVehicle Interior>AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY ).
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.
Check for DTC (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1497/97 is not output | A |
| DTC B1497/97 is output | B |
A
B
Replace the air mix servo motor (for passenger side) (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY).
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.
Check for DTC (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1497/97 is not output | A |
| DTC B1497/97 is output | B |
A
B
Replace the No. 1 damper servo sub-assembly (air outlet servo motor) (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY).
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.
Check for DTC (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1497/97 is not output | A |
| DTC B1497/97 is output | B |
A
B
Replace the air inlet servo motor (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY).
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.
Check for DTC (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1497/97 is not output | A |
| DTC B1497/97 is output | B |
A
B
Replace the cool air bypass servo motor (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING UNIT>DISASSEMBLY).
Since the servo motor cannot be inspected while it is removed from the vehicle, replace the servo motor with a new or a known good one and check that the condition returns to normal.
Check for DTC (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1497/97 is not output | A |
| DTC B1497/97 is output | B |
A
B
Replace the air conditioning harness.
Since the air conditioning harness cannot be inspected while it is removed from the vehicle, replace the air conditioning harness with a new or a known good one and check that the condition returns to normal.
Check for DTC (See page Vehicle Interior>AIR CONDITIONING>AIR CONDITIONING SYSTEM(for Automatic Air Conditioning System)>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC B1497/97 is not output | A |
| DTC B1497/97 is output | B |
A
B
Disconnect the J19 air conditioning amplifier connector.
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| J19-21 (B) - Body ground | Always | 11 to 14 V |
OK
NG