Home › Vehicle Interior › WINDOW / GLASS › POWER WINDOW REGULATOR MOTOR(for Front Door)
RM27M0U _58 Vehicle Interior _049161 WINDOW / GLASS _0234463 POWER WINDOW REGULATOR MOTOR(for Front Door) A

WINDOW / GLASS  POWER WINDOW REGULATOR MOTOR(for Front Door)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The procedure listed below is for the LH side.

·

A bolt without a torque specification is shown in the standard bolt chart (See page General>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS).



PROCEDURE

Hide 85720A 1.INSTALL FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

E281627

a.

Apply MP grease to the sliding and rotating areas of the regulator motor.


b.

Using a T25 ''TORX'' driver, install the motor with the 3 screws.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

HINT:

For a new front window regulator, the installation position of the regulator will be set when the self-tapping screws are installed.



Hide 69802 2.INSTALL FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH

a.

for Regular Cab:

Install the front door window regulator sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Regular Cab)>REASSEMBLY).


b.

for Double Cab:

Install the front door window regulator sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Double Cab)>REASSEMBLY).


c.

for CrewMax:

Install the front door window regulator sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for CrewMax)>REASSEMBLY).


Hide 68102 3.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH

a.

for Regular Cab:

Install the front door glass sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Regular Cab)>REASSEMBLY).


b.

for Double Cab:

Install the front door glass sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Double Cab)>REASSEMBLY).


c.

for CrewMax:

Install the front door glass sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for CrewMax)>REASSEMBLY).


Hide 67832 4.INSTALL FRONT DOOR SERVICE HOLE COVER LH

a.

for Regular Cab:

Install the front door service hole cover LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Regular Cab)>REASSEMBLY).


b.

for Double Cab:

Install the front door service hole cover LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Double Cab)>REASSEMBLY).


c.

for CrewMax:

Install the front door service hole cover LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for CrewMax)>REASSEMBLY).


Hide 67625A 5.INSTALL FRONT NO. 1 DOOR TRIM BRACKET

a.

for Regular Cab:

Install the front No. 1 door trim bracket (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Regular Cab)>REASSEMBLY).


b.

for Double Cab:

Install the front No. 1 door trim bracket (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Double Cab)>REASSEMBLY).


c.

for CrewMax:

Install the front No. 1 door trim bracket (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for CrewMax)>REASSEMBLY).


Hide 86160 6.INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

a.

for Regular Cab:

Install the front No. 1 speaker assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER(for Regular Cab)>INSTALLATION).


b.

for Double Cab:

Install the front No. 1 speaker assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER(for Double Cab)>INSTALLATION).


c.

for CrewMax:

Install the front No. 1 speaker assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER(for CrewMax)>INSTALLATION).


Hide 67602 7.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

a.

for Regular Cab:

Install the front door trim board sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Regular Cab)>REASSEMBLY).


b.

for Double Cab:

Install the front door trim board sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Double Cab)>REASSEMBLY).


c.

for CrewMax:

Install the front door trim board sub-assembly LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for CrewMax)>REASSEMBLY).


Hide 67492A 8.INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH

a.

for Regular Cab:

Install the front lower door frame bracket garnish LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Regular Cab)>REASSEMBLY).


b.

for Double Cab:

Install the front lower door frame bracket garnish LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Double Cab)>REASSEMBLY).


c.

for CrewMax:

Install the front lower door frame bracket garnish LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for CrewMax)>REASSEMBLY).


Hide 74232 9.INSTALL FRONT UPPER ARMREST BASE PANEL LH

Hide 69284C 10.INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

a.

for Regular Cab:

Install the front door inside handle bezel plug LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Regular Cab)>REASSEMBLY).


b.

for Double Cab:

Install the front door inside handle bezel plug LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for Double Cab)>REASSEMBLY).


c.

for CrewMax:

Install the front door inside handle bezel plug LH (See page Vehicle Interior>ENGINE HOOD / DOOR>FRONT DOOR(for CrewMax)>REASSEMBLY).


Hide 11.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).